Network interface configuration

Warning

The following guide is for OFFLINE units only.

Since the OFFLINE user does not have access to the system's root user, the custom AgnosPCB's OS allows the user to change the system's network interface settings by using a simple configuration file.

To set the interface settings, open text editor and add your configuration with the following format:

{
  "IP": "192.168.1.23",
  "PREFIX": "24",
  "GATEWAY": "192.168.1.1",
  "DNS1": "8.8.8.8",
  "DNS2": "8.8.4.4"
}

Replace the values to your network requirements. Save the file as network.conf in the APP folder. Reboot the system and, after a 1 minute, the configuration will be applied automatically.