Barcode reader
The AgnosPCB software incorporates a barcode reader function.
First, open the application and log in with your credentials as usual.
You can either take a REFERENCE photo or upload one directly from your files using the "Open reference" button.
Save the reference in the mosaic and make sure to set the option "use barcodes" as shown below:
If the barcode is not automatically recognized, select the "draw barcode area" button and choose the barcode area.
Once the REFERENCE is loaded, use the "Open UUI" button or take a picture of the UUI. The UUI's barcode will be read automatically. Proceed with the inspection process as usual.
Once you've selected all the errors, you can finish the inspection by clicking on the "finish inspection" button. This will open a window where you can rename the file, add comments, and select if the UUI is OK or NOT OK if it has unpassable errors.
This action automatically generates a pdf report that you can find in the PCB_OUT folder. At the top of the report, you'll see data such as the date, whether the PCB passed the inspection or not, the data, observations, the UUI and REFERENCE image, the errors, and their specifications. Additionally, it'll show the barcode identification number.
If you already have a stored REFERENCE, you can retrieve it and continue with your inspection. To do this, press the "read barcode" button, then read the barcode using the handheld reader, and the REFERENCE will load automatically.
